Our products are made for daily professional use
Model: 3000mm total width
1-sided unlocking when lowering
Conventional two-hand operation
+ Shipping costs within Germany
(without islands) Bulky goods.Shipping 260 €
2499 EUR - 220 volts
2599 EUR - 380 volts
plus shipping and handling
Currently not available (delivery bottlenecks)
Advance reservation recommended due to high demand!
A 2-post lift for cars, sports cars, SUVs & small vans with a short wheelbase up to 4000kg
with conventional two-hand operation
Lifting platform total width of 3000 mm.
Automatic electric 1-sided unlocking when lowering at the push of a button, (with us electric no cable pull)
Manuel by hand drain valve opener on the pump
The stage is durable, high-quality powder-coated, insensitive and almost maintenance-free.
The support arms are automatically locked when they are lifted. If the platform is completely lowered, this lock is released automatically and enables the car doors to be opened wide.
Automatic mechanical crash safety lock integrated on both sides.
The powerful motor and two powerful maintenance-free hydraulic cylinders make lifting and lowering easier.
Synchronization wire ropes mounted without load ensure the synchronization of the support arms.
Hydraulic unit on the front Assembled saves space.
2x door stop rubbers, drive-over plate, end safety switch and height-adjustable turntable with rubber pad + plug-in adapter elevations round off the equipment of the lift.
The lift can also be used as a second parking facility (parking lift)
2x2-part short (front) can be pulled out once
2x2-part, long (rear), can be pulled out once
Lift strength: 4000kg
Lifting height: 1900 mm (turntable turned in)
Lifting height: 1960 mm (turntable turned out)
Max. Lifting height: 2040 mm (plug adapter + turntable unscrewed)
Min. lower height: 100 mm
Maximum wheelbase: 3000mm
Drive-over plate height: 40 mm
Total height: 2822 mm
Total width: 3000 mm including hydraulic pump
Drive-through width: 2160mm with larger vehicles it may be that they have to be pushed into the lifting platform because of the total width of 3000 mm.
Width between the pillars: 2390 mm
Lifting time: approx. 50 sec
Lowering time: approx. 35 sec (adjustable)
Noise level: 70 dB
Weight: approx. 600 kg
Power: 2.2 kW
Electricity operation: (240V / 50Hz 1phase) or (380V50Hz 3Phase) 100 € surcharge can be selected when ordering.
Scope of delivery:
• 2-post lift including motor unit
• Powerful motor with hydraulic unit
• 2x door stop rubbers
• 4x plug adapter elevations
• 4x height-adjustable turntables with rubber pads
• Drive-over plate
• Limit switch Safety switch
• German operating instructions + assembly instructions (video)
• Test book for regular UVV safety checks with EC declaration of conformity.
• The lift is supplied in black.
• Easy assembly as 80% pre-assembled
• New goods in their original packaging.
(Hydraulic oil and heavy-duty ground anchor not included in the price, can be ordered as an option)
See video how it works or
What is an automatic electrical 1-side release when lowering
Conventional two-hand operation when lowering
Info on floor requirements for foundation statics:
Extension of min length 4000 mm width 3000 mm depth 350 mm.
Concrete of strength class C20 / 25 according to DIN1045: 2001-D7 double reinforced
The depth of the foundation must be at least with a 2 post lift with identical load capacity
Amount to 200 mm .
For their own safety, they do not allow competitors to convince them of a concrete strength
From 100-150mm is sufficient! Statically speaking, no matter from which provider you get the 2 post lift
Always the same floor requirements!