top of page

2099 EUR - 220 volts
2199 EUR - 380 volts
VAT included
plus shipping and handling

WG-3500M 3000mm.jpg

Model: 3000mm total width

Manual release when lowering

4000KG

Classic Line

Currently not available (delivery bottlenecks)

Advance reservation recommended due to high demand!

+ Shipping costs within Germany
(without islands) Bulky goods.Shipping 260€

Product description:

A 2-post lift for cars, sports cars, SUVs & small vans with a short wheelbase of up to 4000kg

with manual unlocking on both sides when lowering.

Lift total width of 3000 mm.

The stage is durable, high-quality powder-coated, insensitive and almost maintenance-free.

The support arms are automatically locked when they are lifted. If the platform is completely lowered, this lock is released automatically and enables the car doors to be opened wide.

Automatic mechanical crash safety lock integrated on both sides.

The powerful motor and two powerful maintenance-free hydraulic cylinders make lifting and lowering easier.

Synchronization wire ropes stored without load ensure that the support arms run in sync.

Hydraulic unit  Front side  Assembled saves space.

2x door stop rubbers, drive-over plate, end safety switch and height-adjustable turntable with rubber pad round off the equipment of the lift.

 

The lift can also be used as a second parking space (  Parking platform) can be used

Support arms: 

2x2-part short (front) can be pulled out once 

2x2-part, long (rear), can be pulled out once  

Technical specifications:

Lift strength: 4000kg

Lifting height: 1900 mm (turntable turned in)

Lifting height: 1960 mm (turntable turned out)

Max. Lifting height: 2040 mm (plug adapter + turntable unscrewed)

min. lowering height: 100 mm

Maximum wheelbase: 3000mm

Drive-over plate height: 40 mm

Total height: 2822 mm

Total width: 3000 mm including hydraulic pump

Drive-through width: 2160mm for larger vehicles it may be that they have to be pushed into the lifting platform because of the total width of 3000 mm.

Width between the pillars: 2390 mm

Lifting time: approx  50 sec

Lowering time: approx. 35 sec  (adjustable)

Noise level: 70 dB

Weight: approx. 600 kg

Power: 2.2 kW

Electricity operation: (240V / 50Hz 1phase) or (380V50Hz 3Phase) 100 € surcharge can be selected when ordering.

 

 

Scope of delivery:

•  2-post lift including motor unit

•  Powerful motor with hydraulic unit

•  2x door stop rubbers

•  4x height-adjustable turntables with rubber pads

•  Drive-over plate

•  Limit switch Safety switch

•  German instruction manual + assembly instructions (video)

•  Test book for regular UVV safety checks with EC declaration of conformity.

 

• The lift is supplied in black.

• Easy assembly as 80% pre-assembled

• New goods in their original packaging.

 

(Hydraulic oil and heavy-duty ground anchor not included in the price, can be ordered as an option)

See video how it works or

What is manual release when lowering

Info on floor requirements for foundation statics:

Extension of min length 4000 mm width 3000 mm depth 350 mm.

Concrete of strength class C20 / 25 according to DIN1045: 2001-D7 double reinforced

The depth of the foundation must be at least with a 2 post lift with identical load capacity

Amount to 200 mm .

For their own safety, they do not allow competitors to convince them of a concrete strength

From 100-150mm is sufficient! Statically speaking, no matter from which provider you get the 2 post lift

Always the same floor requirements!

bottom of page